Loading...
 

2.6.4 Telnet Window

Your Telnet window will be similar to this one, with six tabs.

Telnet

  • The textbox labeled "Type:" is where you can input any text commands to send to the cluster. For example, typing "bye" without the quotes and hitting Enter will disconnect you from most clusters.
  • The "Reconnect" button will re-establish your connection to the cluster shown on the label of the first tab (see below).
  • A font sizer is at the upper right, just below the "X" to close the window. Click the up or down arrows to change the size of the text in the text pane below.
  • The text pane is where all messages from the Telnet cluster will appear. Click in the text pane to temporarily halt scrolling; move the mouse cursor out of the text pane to restart it.
  • All incoming information from the connected DX cluster is displayed in the text area of the Telnet window. They are color-coded by mode - defaults are blue for CW, magenta for digital, and black for SSB. Spots forwarded to the Bandmaps and Available Mults & Qs window are filtered as provided on the Filters tab. Spots that are filtered out (not forwarded) are greyed out in the text area.


Split information given in the spot comment will be recognized and forwarded to the Bandmaps and Available window. When such a spot is selected the transceiver will go into split mode (if applicable). The program recognizes: UP, U, DOWN, DN, D and the word QSX. Examples: QSX 3.838, QSX 4, UP 5, DOWN 2, U 5, D4, U4, DN4, UP4, DOWN4, QSX7144 etc.

1. Tabs

There are six tabs above the text pane, which is displayed by default and also tied to the left-most tab, which always displays the call-sign of the currently-selected cluster.

The first tab displays the callsign of the Telnet cluster node to which you are connected, and opens the lower pane so that you can see the flow of spots from the node. Except as noted, any changes made on the other tabs take effect when you switch back to this tab.

1.1. Clusters (including problems connecting)

The Clusters tab is used to select the cluster to which you want to connect, from a list that you can also edit from the tab. The Edit List button in the window under the Clusters tab opens a new edit window where you can make changes to the list. You can import or export the list of clusters from/to a file using the File menu in the edit window. By default, these files are stored in the ExportFiles folder in the N1MM Logger+ user files area.

Telnet Clusters Tab

Also on the tab:

  • A checkbox to tell the program to automatically log on to the selected cluster whenever the Telnet window is open.
  • A checkbox to format some commands properly when you are connecting to a DXSpider cluster.
  • A "Logon with" field, where you fill in the callsign the cluster is expecting to see at logon.
  • A "Show Telnet Buttons" checkbox. Uncheck it to reduce the size of the Telnet window as much as possible, saving screen space.
  • A "Connect" button that will send the logon sequence to the selected cluster and switch your view of the window back to the selected cluster.

 Problems Connecting

If you cannot connect to a cluster check the following:
  • Edit the clusters list and make sure that the domain name of the cluster is correct.
  • Edit the clusters list and make sure the port of the cluster is correct and it is separated from the domain name by a colon (:), e.g. k1ttt.net:7300
  • Disable your anti-virus software and (re)install the latest update. Test the connection. Reenable your anti-virus software.
  • Check your software firewall to make sure N1MM Logger+.exe is allowed to connect externally.
  • Check your hardware firewall to make sure that connecting to port 23 (default) or port nnnn (as specified in the cluster list) is allowed.
  • Try testing using the Windows Telnet program to connect. For Windows 10, you can enable Telnet by going to Programs and Features, Turn Windows Features on or off, select Telnet client and press OK.
  • Connect via Telnet by issuing the following command in the Windows command box next to the Windows button: Telnet , e.g. Telnet dxc.w9pa.net 7373 If this connects, it means that you have the wrong dns or port, or that something in your machine is blocking N1MM Logger+ from connecting.

 Connecting to Telnet from a multi-computer network

If you are using N1MM Logger+'s networking to connect multiple computers together in a network, only one of the computers in the network (the one designated as "Master") connects to a Telnet cluster. The other, non-Master computers need to have their Telnet windows open to receive spots from the Master computer, but they do not connect directly to a Telnet cluster.

1.2. Bands/Modes

The Bands/Modes tab allows you to select which bands and modes will be passed through to the Bandmap(s) and Available Mults & Qs window. Select bands individually or select groups of bands with the large buttons across the top ("HF", "VHF", etc.). Select mode(s) individually, by clicking the "All" button, or by checking "Contest" to pass only the mode(s) valid in the current contest. The "Reset All Defaults" button will check every band and mode.

Telnet Bands/Modes

1.3. Filters

The Filters tab provides another set of filters, as well as checkboxes for a few related options.

Telnet Filters Tab

  • Set the desired Bandmap timeout for DX spots by entering time in minutes.

1.3.1. Save Spots

The "Save Spots" checkbox is a new feature, added to solve an issue with packet spot processing that caused the spots database (Spots.s3db in the Databases folder) to grow too large and impact program performance. If you are experiencing symptoms of this, check the size of your Spots database. If it is more than a few MB, that may be why.

The "Save Spots" box is unchecked by default, and if left that way, the Spots database is not used at all. The advantage is very low performance impact from Telnet use. The drawbacks are that when you restart N1MM Logger+, the Bandmap will be empty. The check for Telnet spots in the Check window will not be active, and the "Spotted" option in the Multiplier window will not work.

If the box is checked, N1MM+ now honors the Bandmap timeout value set on this tab. For example, if you set the timeout value at 20 minutes, the Spots database will only retain spots for the last 20 minutes. When you restart NL+, the Bandmap will only display spots for the last 20 minutes, and the Check and Multiplier windows will only use spots from the last 20 minutes. The developers are aware that the latter is a slight drawback, and may look at other options after the high contest season is over.

1.3.2. "Show non-workable spots" and "QSYing wipes call and puts it in the bandmap"

These options have moved here from the Config menu.

1.3.3. "Randomize incoming spot frequencies"

Automatically adds or subtracts a small amount from the received spot frequency, so as to improve your chances of breaking a "packet pileup" when you click on a spot.

1.3.4. Spot origin filtering

There are two levels of spot origin filtering. You can either choose to pass spots only from your country or continent (determined from the Station Data page) or only from specified prefixes. Generally, we recommend that you use spot filtering at your Telnet cluster instead.

1.4. Spot Comment

This tab lets you specify a comment for each spot you make (such as "WPX") and add log data fields to the fixed comment.

Telnet SpotCommentTab

1.5. Band Plans

The Band Plans tab formerly permitted setting limits for mode segments within band plans. This function has now been moved to the Bandmap window, and is accessed by right-clicking on a frequency label (e.g. "7045"). The tab will be removed before long.

2. Sending Stored commands to the cluster

Across the bottom of the Telnet window are twelve buttons which can be individually programmed with stored messages to be sent to the Telnet node. Right-click in the button area to bring up the editor.

Telnet ButtonEditor

Different button sets can be saved and recalled for use with the File menu at the upper left. By default the text files containing sets of button messages are stored in the FunctionKeyMessages folder in the N1MM Logger+ user files area.

3. Mouse Clicks

  • When the you left- or right-click in the text area, scrolling is stopped. A right-click on a callsign brings up a small menu

Telnet RightClickonCallsignMenu

Click on "Jump to this spot" to send the active radio to the spot frequency. This option is mainly retained for nostalgia. It makes far better sense to click in the Bandmap or the Available window while maintaining the Telnet window minimized, once you have the filters, bands and modes set up as you want them.

4. Multi-User Setup

When running in networked computer mode, only the Master station has to be connected to the DX-cluster. The master station will relay all information to and from the connected computers to the cluster node.

5. CW Skimmer and the Reverse Beacon Network (RBN)

CW Skimmer version 1.1 and up has a built in Telnet server which allows N1MM Logger to receive spots from it. Add an entry to your Telnet list with the address: 127.0.0.1:7300 if you are running Skimmer on the same machine as N1MM Logger. If running on a different PC on the same network, use that machine's internal IP address in the same format.

The Reverse Beacon Network's Telnet relay servers make all of the RBN's Telnet spots available to users worldwide. Because of the huge volume of spots on a major contest weekend - at least fifty times as many as the conventional cluster network - we highly recommend that you connect to a "retail" server and use the node's filtering capabilities to manage the quantity actually sent to you. It will be helpful to use a short Packet Spot Timeout (set on the right-click menu of either the Bandmap or on the Filters tab of the Telnet window) - 15 minutes should be more than adequate, because CW Skimmer re-spots stations that remain on the same frequency every 10-12 minutes.

Because of the high volume of spots, the RBN uses specially-designed relay servers on its Telnet nodes, which are internally streamlined. A side-effect is that these nodes do not respond to user commands. This is another good reason to connect to a "retail" cluster that handles both RBN and traditional spots. You can find a list at this site .

Local Skimmer spots can be merged with spots from conventional DX clusters using software such as WintelnetX or CC User, freeware by K1TTT and VE7CC respectively. Skimmer spots are distinguished from regular spots by the addition of unique markers. In the Bandmaps, Skimmer or RBN spots are identified with "#" after the callsign and bearing; spots from your own Skimmer, identified by the callsign set in your Station Data), are marked with "!"

6. Spot Filtering

There are three levels of spot filtering available. The first and most powerful of these using whatever filtering capabilities are built into the node. The second is established by the Band/Modes and filters tabs of the Telnet window. A third is set by the Available Mults & Qs window's Bands and Modes button. The latter only affects what is seen in that window.

6.1. AR Cluster V6's Skimmer Spot Quality Filtering

Because of the large volume of spots generated by the RBN, even at very high accuracy rates (over 99 percent), a large number of busted spots have been noticed. Toward the end of major contests, these may be a significant problem for serious competitors. In addition, calibration and image errors are occasionally encountered due to hardware and software issues.

CT1BOH has developed and AB5K has implemented DX cluster-based evaluation of spot quality, in an effort to reduce the number of bad spots seen on the RBN. This nice piece of work was implemented in Version 6 of AR Cluster. AB5K.net was the first node offering this feature, and many more now have it too. You can find an exhaustive list at this web site.

The evaluation is subdivided into 3 categories:

  • Validation – When a callsign is first spotted on a given frequency, it is tagged with a “?” in the last column of the Comment field of the spot. When two or more other RBN nodes agree on the spot, the tag on each subsequent spot becomes “V”
  • Frequency – After a station has been spotted on a given frequency, if it is then spotted on another frequency the spot is tagged as above, but with a “Q”, for QSY? Again, once the move is confirmed, subsequent spots are tagged with V. The idea here is to catch I/Q image spots, spots sent by badly-calibrated Skimmers or spots inadvertently sent on the wrong band.
  • Busted Spots – This is the real high point of the Quality Tags. The algorithm uses some sophisticated measures of the “resemblance” between the busted spot and the real one, and will tell you both what spots are busted and what the real call is, based on other spots at or very near the same frequency.


Here is a brief snapshot of one minute of RBN plus traditional spot flow.

PuTTY RBN SpotFlow

You can see that the node software picked up two busted spots, and also was skeptical about others until they were repeated. There are no QSY spots in this sampling, but if there had been, you would have seen the “Q” tag.

When you first connect to an AR Cluster, make sure it is sending RBN spots as well as traditional ones by commanding it to “set dx filter”. Once RBN spots are flowing, you can set any other filters you want to, such as limiting spots to stations in your geographic area. Then all you have to do is send “set DX extension skimmerquality”, and the Quality Tags will start to appear at the right end of the Comment field.

Some operators will prefer to filter out certain of these spots. Most likely candidate for this treatment are spots tagged with “B”., but you can filter out “?” or “Q” spots too, and the node will not send spots of those stations to you until they are confirmed (and tagged V). Here’s a partial list:

Set DX filter Skimbusted – only send me those spots that are marked as busted, together with the node's identification of the correct spot)

Set Dx Filter NOT Skimbusted – don’t send me any spots that are tagged as B

Set DX filter NOT SKimQSY – don’t send me any Q spots until they are verified

Set DX filter Skimvalid – only send me spots that have been tagged with a V

These and other Skimmer-related filtering commands are found on AB5K’s website.

One of the neat things about AR Cluster V6 is that you can create complex filters to show you exactly what you want. For example:

SET DX FILTER {MYCALL} OR (spotterstate=MD OR spotterstate=PA OR spotterstate=VA OR spotterstate=WV)

This filter will tell me whenever I am spotted anywhere in the world, and otherwise will show me all spots, both traditional and RBN, made by stations in the states around my QTH.

 Abbreviating ARC V6 filter commands

While N1MM Logger+'s Telnet buttons will accommodate fairly long commands, stringing together a lot of "state=" or "cty=", or "state<>" or "cty <>" commands could be too much. Fortunately, there is an abbreviated syntax. The "[entity]=/<>" filters can be abbreviated as follows: state=[MD,VA,WV,PA] or CTY=[K,VE,KP4]


You could add some Quality Tag-specific filters – for example:

SET DX FILTER call={MYCALL} OR NOT skimbusted and (spotterstate=md OR spotterstate=pa OR spotterstate=va OR spotterstate=WV)

This filter will work the same as that above, but also will not show me any spots that the cluster evaluates as busted.

Here’s another filter that lays on some more complexity, written by CT1BOH and recently published on CQ-Contest:

Set DX Filter (skimValid OR not skimmer or ((SkimQsy OR SkimUnknown) AND (cty <> K AND cont <> EU )))

This filter shows human spots, Skimmer spots appraised as V(alid), and Q and ? spots from outside Europe and the USA. It filters out Q(new frequency?) and ? (not yet valid) spots from the US and Europe, on the theory that it’s less important to jump on those first.

So that’s the story – whether you choose to filter at the cluster node, or see everything coming in and make your own decisions, Quality Tags can be a very useful tool. Congratulations to CT1BOH and AB5K for their achievement.

6.2. Using Filters

Many operators will prefer to make their own judgments, rather than using filters. There are some advantages to this, probably. For example, a rare multiplier spotted initially by only one RBN node would carry a “?” tag until two more confirm the spot. Waiting for it to come through a Skimvalid filter could result in your being twentieth in the pileup instead of first or second. Late in a big contest, a large multi-op will have worked many of the stations on each band. A lot of busts will seem to be valid, but operators may want to make that judgment quickly for themselves rather than relying on the node. The next section shows how you can use N1MM features to make this approach easier.

N1MM Logger has two main ways of initiating S&P QSOs, by using either the Available Mults and Qs window or the Bandmap(s). Of the two, the Bandmaps are the easiest way to work with Quality Tags, simply because the Available window scrolls so quickly when receiving spots from the RBN. Just mouse over the callsign on the Bandmap that you wonder about, and the full spot, including the Quality Tag, will appear in a tooltip. This makes it really quick and easy to skim over the bandmap and dismiss the busted ones with Alt+D Here’s an example

Bandmap RBNSpotWithToolTip

In this example, if you had worked EA1FAI a couple of minutes before, when you saw EA1FAE pop up, you moused over him, and he was revealed as a busted spot. Alternatively, you can click on a call to select him for a possible QSO, and if the tooltip reveals he’s a bust, you just hit Alt+D and move on.

6.3. Spot Flow in N1MM Logger+

The following diagram may help you visualize how Telnet spots flow through N1MM Logger+

Telnet SpotFlow

 Spot Filter Tips

The Available window band/mode settings only affect what is displayed in the Available window's spot list. Spots flow to them through the band/mode and filter tabs of the Telnet window, and so must be the same as, or more restrictive than, those settings. If you discover that certain band or mode choices are greyed out, take a look at your Telnet window settings.

In networked-computer mode, spots flowing to the Networked Computers are not affected by any filter settings in the Master Station. Networked Stations' spots arrive unfiltered, in order to let the operators at those stations set their own filters in N1MM Logger+.


Last Modification: 28 July 2016 09:14:08 EDT by N1MM.